Sub kategori
Scale : 1/10thBrushed/Brushless : BLSensored/Sensorless : SDPole Count : 2KV Rating : 2800LiPo Cells : 2-3SNo-load Current(A) : 1.9Timing : FixedApplications : STOCK/SPORT class (choose the motor as per competition rules) of 1/10th , 1/12th On-road
Feature:• 3.0 ratio gear transmission• Rear wheel drive• Rear motor placement• Gear Drive Transmission• IFS - Inbroad Front Suspension• Free length wide @ Front & Rear• KPI Knuckle• Most clearances lower arm• Magnet body post• Double Wipers steering• All Fibreglass• Wider front Bumper• Lift up servo places• Front n Rear wide 198mm (adjustable)• Wheel...
Specification:• Controls: Forward/Brake/Reverse• Input Voltage: 1S lipo• BEC: 6V/7.4V selection/max ~3A• Motor Limit: 6.5T or over• Max current: ~100A per phase• Size: ~41x32x18mm (without fan installed)• Weight: ~42g (not include wiring and fan)• Come with XPS V3 LED card or it can be used with Radon LCD card(need to buy separately)
Specifications:. Controls: Forward/Brake/Reverse. Input Voltage: 2S-3S lipo* BEC: 6V/7.4V selection/max ~5A. Motor Limit: 4.5T or over. Max current: ~140A per phase. Size: ~41x32x18mm (without fan installed). Weight: ~42g (not include wiring and fan). Come with XPS V3 LED card or it can be used with Radon LCD card(need to buy separately)
Specification:Battery Input Voltage: 2S lipoBEC: 6V/1.5A1/27 motor Limit: 10000kv or belowMax Ampere draw: ~20A per phaseSize: ~22.5x13.5x9mm(not include the plug)Weight: ~4.5g(without any wire installed)
Specification:- Sensor type- Motor Dimension (Diameter x Length): 15mm x 25.1mm (size is ~15% smaller than the MBX V1 motor)- Shaft Diameter: 2mm- Weight: ~14~15g (vary in different KV motor)- Available KV: 3500KV- Recommended RC Model Car: 1/27 miniz car
Include:3Racing Sakura 1/10 D5S Sport Edition Ver.2 Drift Car Kit EP (1 set)Require:• Radio System (Min. 2ch)• ESC• Motor• Servo• Pinion• Body• Battery• Charge
Specification:• Overall Length: 373mm MAX• Overall Width: 187mm• Overall Height: 115mm• Wheel Base: 259mm• Weight: Approx 1320g
Specs:. Controls: Forward/Brake/Reverse. Input Voltage: 2S-3S lipo. BEC: 6V/7.4V selection/max ~5A. Motor Limit: 4.0T or over. Max current: ~200A per phase. Size: ~38x30x15.6mm. Weight: ~37g (not include wiring and fan)
Specifications:- Motor Dimensions (Diameter x Length) 35.8mm x 51.5mm- Shaft Diameter: 3.17mm- Magnet Dimensions (Diameter x Length): ~12.3 x 5x 24mm(3.5T~9.5T), ~12.5 x7.2x25.2mm (10.5T~21.5T),~12.3 x7.2x25.2mm (25.5T)- Variable End bell with changing the output power and torque of the motor- Weight: ~150g (vary with different motor turn)- Available...
available 5000kv and 7000kv Specification:• Motor Dimension (Diameter x Length): 15mm x 25.1mm• Shaft Diameter: 2mm• Weight: ~14~15g (vary in different KV motor)
DimensionsWheelbase: 313mmLength: 480mmWidth: 230mmClearance: 75mm